90° Cross in feed system
The system is equipped with a forward/ backward moving in feed belt in order to create space for the first product to be taken away by the in feed chain without touching the second product. The in feed belt is placed under a 90 degrees angle in order to bring the products from long side leading between the pusher pins of the in feed chain with short side leading. The combination of the belt movement and the angle makes it ideal for irregular and fragile products.
The electronic feeding system is used to feed crosswise the products, arriving from the distribution stations or other source, on the in feed conveyor of the wrapping machine.: The system is either mechanically or electronically connected at 90° with the in feed conveyor of the wrapping machine while the transfer of the single products can be direct or through an overhead transfer chain with lugs. The pressure less accumulation guarantees a smooth transfer of the products without friction.
Benefits
• Ideal for irregular and fragile products due to the combination of belt movement and angle;
• Eccentric in feed chain to prevent it from becoming soiled;
• Crumb trays underneath the whole in feed system;
• All product contact parts are stainless steel;
• Standard with start stop function, optional with a speed control;
• Compact design so the unit requires little floor space.
Special features
• Belt material FDA approved Poly-Urethane (white);
• Identical execution of belt drives to minimise number of different parts;
• All product contact surfaces are executed in stainless steel;
• Safety covers are executed for easy access to the product flow area;
• Stainless steel crumb trays at every belt transfer of the system.
Options
•
Technical Data
| Technical details | |
| Belt width: | 240 mm |
| Product length: | 20 – 220 mm |
| Product width: | 20 – 60 mm |
| Product height: | 5 – 50 mm |
| Capacity: | up to approx. 250 ppm |
Not: All maximums may not apply on the same carton maximum and minimum sizes shown should be used as guide only and must be confirmed by our firm’s technical department
Photos
90-derce-besleme-32
90-derece-besleme
90-derece-beslememe
tokatlama-besleme
Rights to make technical alterations reserved
