Belt bend
- For the safe transportation of Food and Non-Food products.
- Standard band widths between 200 mm and 1800 mm, suitable for many applications
- Angles of belt bends can be adapted to customer requirements. Standard angles are between 30° and 270°. For other angles, technical specifications must be clarified.
- Reliable transport even of very small products via belt edges with diversion rollers of 7, 10 or 14 mm.
- Stainless steel design available depending on hygiene requirements.
- The conveyor belt type is determined by product specification and individual requirements, e.g. friction, cleaning etc
- High performance with low noise levels
- Low machine height
- Low maintenance
Benefits
- Low machine height, allowing the stacking of various belt components
- The conveyor belt is pulled throughout, allowing for a regular and slip-free movement.
- The chain is low-maintenance with only minimal wear due to automatic lubrication and tensioning.
- High standard of hygiene thanks to downwardly open design.
- Cylindrical and small end rollers for optimal product transfer between belt components
- Customized dimensions allow for a seamless integration into your line.
- Easy belt change, either upward or towards the center, without requiring disassembly of sub-frame components
Special features
- For the safe transportation of Food and Non-Food products.
- Cantilever belts are supported on one side only and have a very low build. Typical applications are therefore wherever space is limited, e.g. as gap-closing belts at product discharge or as product in-feed conveyors (PIC) for feeding a packaging machine or top loader.
- Stainless steel design available depending on hygiene requirements.
Options
- Belt drive with servo motor
- Ceiling suspension
- Sub-frame on rollers, mobile
- Stainless steel model
- Belt scraper, with or without crump plate
- Electronic control
- Other options on request
Technical Data
| Technical Details K-120 | |
| Widths: | 200 mm to 1800 mm |
| Angles | 30° to 270° |
| Speeds: | Up to over 120 m/min (center drive) |
| Diversion roller: | f7,10,14 mm |
| Equipment: | Belt and roller scraper crump plate |
| Products: | Unpackaged or packaged |
Not: All maximums may not apply on the same carton maximum and minimum sizes shown should be used as guide only and must be confirmed by our firm’s technical department
Photos
Belt bend
db1
db2
db3
db4
db5
db6
Rights to make technical alterations reserved
